<%NUMBERING1%>.<%NUMBERING2%>.<%NUMBERING3%> PRTG Manual: System Requirements

PRTG Network Monitor consists of two main system parts, the PRTG core server and one or more probes.
icon-book-arrowsFor details, see section Architecture and User Interfaces.

System Requirements for PRTG Core Server (PRTG on Premises)

To install a PRTG on premises server and work with it, you need to meet the following requirements:

  • A PC or server with at least a dual core CPU and a minimum of 2048 MB RAM is sufficient for the PRTG server.
  • The operating system Microsoft Windows Server 2012 R2, Microsoft Windows Server 2016, or Microsoft Windows 10.
  • A web browser to access the web interface. The following browsers are officially supported:
      • Google Chrome 67 or later (recommended)
      • Mozilla Firefox 61 or later
      • Microsoft Internet Explorer 11

icon-prtg-on-demandPRTG hosted by Paessler does not require any hardware for the PRTG server, but at least one remote probe installation is necessary to monitor your local network when using PRTG hosted by Paessler.

System Requirements for PRTG Remote Probes

  • Hardware
    A PC or server with at least a dual core CPU and a minimum of 2048 MB RAM is sufficient for remote probes.
  • Operating system
    We recommend that you use Microsoft Windows Server 2012 R2, Microsoft Windows Server 2016, or Microsoft Windows 10 for remote probes.
  • Stable network connection
    Remote probes require a stable network connection between the PRTG server and the remote probe. Remote probes that connect to a PRTG hosted by Paessler server need a reliable internet connection. Unstable connections, for example via 3G, might work but it is possible that you lose monitoring data if the connection is non-reliable.

icon-asterisk-blueWhy are remote probes helpful for monitoring with PRTG? Because they can extend your monitoring.

  • Remote probes allow you to monitor different sub-networks that are separated from your PRTG on premises core server by a firewall and to keep an eye on remote locations. You can install one or more remote probes.
  • Remote probes are useful if you want to distribute monitoring load by taking it from the system running the PRTG core server and putting it on one or more remote probe machines.
  • You will need a remote probe if you want to monitor your local network using a PRTG hosted by Paessler instance.
  • Remote probes may be suitable monitoring components in several individual scenarios that depend on your custom network setup.

Planning a PRTG on Premises Installation With Hundreds of Sensors or More?

The maximum number of sensors you can monitor with one PRTG on premises installation mainly depends on the monitoring technology and the monitoring intervals you use. In general, we recommend that you use a dedicated physical machine to run both the PRTG core server and PRTG remote probes.

icon-book-arrowsFor more information, see section Detailed System Requirements.

icon-prtg-on-demandPRTG hosted by Paessler is restricted to max. 5,000 sensors, more sensors are not possible. This number of sensors is available in the PRTG-5000 subscription.


Paessler Website: System Requirements for PRTG Network Monitor—Recommended Setup for Most PRTG Users

Knowledge Base: Planning Large Installations of PRTG Network Monitor

Knowledge Base: How can I speed up PRTG—especially for large installations?

Knowledge Base: Checklist for Running PRTG on VMware

Knowledge Base: Which ports does PRTG use on my system?

Knowledge Base: Which servers does PRTG connect to for Software Auto-Update, Activation, etc.?

Knowledge Base: Which .NET version does PRTG require?

PRTG hosted by Paessler: Enter a New Era of Monitoring


Introduction Topics